fps 60, fps 80, fps 110 www.vishay.com vishay draloric revision: 14-sep-15 1 document number: 22099 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 rf power plate capacitors with flat rim, class 1 ceramic material capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. connection terminals: ? made from copper / brass, silver plated finish capacitor body completely protective lacquered. marking type designator, capacitance value and tolerance, rated peak voltage, production date code, ceramic material code, manufacturer logo accessories added two screws and washers features ? low losses ? high reliability ? small dimensions applications ? industrial high frequency appliances ? medical rf equipment ? filter, bypass, and coupling circuits capacitance range 100 pf to 1.0 nf capacitance tolerance 10 % ceramic dielectrics ? r42 (tcc - 250 ppm/k) ? r85 (tcc - 750 ppm/k) rated voltage ? 3.5 kv p ? 6.0 kv p ? 7.0 kv p ? 10 kv p ? 12 kv p dielectric strength test 200 % of rated voltage (50 hz) dissipation factor max. 0.05 % measuring frequencies: ? 1 mhz (< 1 nf); 300 khz or 100 khz ( ? 1 nf) insulation resistance min. 10 000 m ? (at 25 c) operating temperature range -55 c to +100 c quick reference data description value ceramic class 1 ceramic dielectric r42, r85 r85 r85 type fps 60 fps 80 fps 110 voltage (v p ) 10 000 12 000 3500 7000 6000 min. capacitance (pf) 500 100 1000 500 1000 max. capacitance (pf) 500 300 1000 500 1000 mounting screw terminal
fps 60, fps 80, fps 110 www.vishay.com vishay draloric revision: 14-sep-15 2 document number: 22099 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) the surface temperature during op eration must not exceed +100 c note ? dimensions w 2 will vary depending upon capacitance value sap part number, electrical and dimensional data part number ceramic cap. value (pf) rated voltage (kv p ) rated power (kvar) (1) rated current (a rms ) dia. d max. mm (inches) width w 1 mm (inches) width w 2 mm (inches) type fps 60 fps060wf10136bh1 r42 100 12 10 13 62 (2.44) 29 1 (1.14 0.04) 20 1 (0.79 0.04) fps060wf20136bj1 r85 200 30 1 (1.18 0.04) 21 1 (0.83 0.04) fps060wf25136bj1 250 29 1 (1.14 0.04) 20 1 (0.79 0.04) fps060wf30136bj1 300 27 1 (1.06 0.04) 18 1 (0.71 0.04) fps060bh50136bj1 500 10 25 1 (0.98 0.04) 16 1 (0.63 0.04) type fps 80 FPS080VY50136BJ1 r85 500 7.0 15 13 86 (3.39) 29 3 (1.14 0.12) 15 3 (0.59 0.12) fps080vt10236bj1 1000 3.5 15 16 27 3 (1.06 0.12) 11 3 (0.43 0.12) type fps 110 fps110bf10236bj1 r85 1000 6 30 13 116 (4.57) 30 3 (1.18 0.12) 16 3 (0.63 0.12) dimensions in millimeters (inches) related documents general in formation www.vishay.com/doc?22071 w 1 w 2 m6 thread s d
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
